Analysis of four color filling process tips

There are many signage materials, such as acrylic, PVC, two-color board, and imitation mahogany and imitation marble signage produced by the company's signage company. Although the material is different, there is no difference in the setting of the advertising engraving machine, and the quality of the production is good. It is often shown in the post-engraving treatment process. According to the focus of our peers, we use the imitation mahogany and imitation marble signage products manufactured by the Chengdu Landmark Signage Factory as an example to introduce this series of presentations for advertising design, advertising production, and arts and crafts. The reference series for the industry, supplies, and decorating and decorating industry introduces the following three: Filling the coloring process The imitation mahogany and imitation marble advertising signage products produced by the Signage Brand are based on high-density fiberboard as the base material. The process produces a new type of advertising signboard with a natural texture of natural mahogany and marble and a strong visual impact. The product is easy to engrave, easy to color paint, excellent adhesion, the product has been processed by the surface process, so after the late engraving parts do color paint, no need to deal with the surface, so the operation is simple, the processing cost is low, and has no Deformation, no smell, good moisture resistance and other advantages. However, because the material is a fiberboard after all, it is not as easy to paint with color as acrylic material. Therefore, novices often feel difficult.

One of the tricks: Engraving settings Choose a three-dimensional engraving (someone called: two-dimensional semi-engraving) scheme as much as possible, and select a 90-degree conical knife for engraving, which visually weakens the roughness on the engraving surface of the fiber sheet.

Tip 2: When engraving settings, do not appear layered engraving, one-time set to the best depth, can be achieved by changing the tool. This is because after the layered engraving, there will be stack marks that affect the smoothness of the lacquer part.

Tip 3: Since the surface of the workpiece is affixed with a sticky note before engraving, it can be safely operated during filling. Directly using brush to fill colors manually, saving paint and labor, the effect is not bad.

Tip 4: When choosing a color for painting, you should first spray the color paint in a paper cup for 15 minutes and then fill it with a brush. Otherwise, the highly corrosive diluent in the paint can damage the paint surface of the workpiece.

Basic Apron

Digital Apron,Adult Apron,Bib Apron,Chef Apron

Denim Apron,Basic Apron Co., Ltd. , http://www.china-aron.com

Posted on