The Shenzhen Consumer Council held a press conference yesterday. For the first time, a comparative test report on leather shoes (casual shoes) was released. According to the report, a total of 55 batches of commodities of 28 manufacturing companies were tested, exceeding 30 percent unqualified and 20 unqualified batches. Among the sub-samples, there were 17 batches because of unsatisfactory signs and 8 batches that were intrinsic quality failures (5 batches of labels and intrinsic quality were unqualified). According to reports, for the detected products that failed to pass the mark, the city’s Consumer Council requested the company to rectify the deadline, and for the products with unqualified internal quality, the city’s Consumer Council asked the merchants to do the recycling. The city’s Consumer Council yesterday also issued a guide on how to select consumer products for footwear.
The complaints for leather shoes increased sharply year by year. According to reports, in recent years, consumer complaints on footwear have been prominent. In 2008, the Consumer Council of Shenzhen City received 167 complaints from consumers (81 of them) and 216 in 2009 (leather shoes 119). Zong), and from January to October last year rose to 250 (115 shoes), the complaints mainly focused on broken bottom, degumming, peeling, bleaching and other issues, and there are many differences between consumers and businesses in the exchange and repair. dispute.
In order to strengthen the social supervision of leather shoe products and guide consumers to choose inexpensive and suitable products for themselves, the Shenzhen Consumer Council launched a comparative test of leather shoes (casual shoes) from December last year to March this year. The samples of this comparative test were all purchased by the city's Consumer Council staff, together with professional sampling personnel from the testing institutions, at Shimao Department Store, Rainbow Shopping Mall, Maoye Department Store, and Sun Department Store. The samples involved 55 batches of commodities from 28 manufacturing companies. The test included 12 specific items such as the strength of the base, peeling resistance of leather shoes and signs, and the inspection was conducted by the Shenzhen Institute of Metrology and Quality Inspection.
According to reports, the test report passed 35 batches and failed 20 batches. The pass rate was 63.6%, and the failure rate was 36.4%. Among the unqualified 20 batches of samples, 12 batches were unqualified, 3 batches were unqualified for intrinsic quality (except labels), and 5 batches of labels and intrinsic quality were unqualified.
Among the 17 batches of unqualified labels, the reporter found that the unqualified items involved were non-manufactured date marks in the shoes or the inner packaging, no zip code on the inner packaging (shoe box), no shoe type annotation inside the shoe, and inner packaging ( The product standard used on the shoe box is incorrectly labelled, and there is no place of production on the inner box (shoe box).
Relevant person in charge of the city’s Consumer Council stated that the unclear, incomplete, and incorrect footwear product labeling may cause consumers to purchase products that cannot be purchased when they are purchased, resulting in problems with use or quality problems that cannot be traced back.
The result of the unqualified quality of the report was learned. The reporter learned that in the comparison test of shoes (shoes), the sample with internal quality was 47 batches and the pass rate was 85.5%. Intrinsic quality substandard items are: Peeling Penetration Strength, Folding Resistance of Shoes, Heart Bending Stiffness, Heart Core Hardness, Heel Hardness at the Bottom, Outsole and Outer Bottom Adhesive Strength, Outsole Wear Resistance 7 item.
There were 3 batches of unsatisfactory hardness in the sample, namely: Leonardo shoes with model specification grade “T8520153L358022 black qualified product†produced by Zhenwei shoe factory of Zhenwei Xiefu Leather Goods Co., Ltd. of Heshan City, Guangdong Province. Heshan City Tailai shoe factory produced on January 1, 2010 model specification grade "J277307 black qualified products" men's shoes, Guangzhou City top macro footwear leather factory June 30, 2010 production model specification grade is "PS921516 -B qualified men's shoes (British Paul leather shoes). There are 1 batch of unqualified bending rigidity, which is the men's shoes with model specification grade "J277307 black qualified product" produced on January 1, 2010 by Heshan Tailai Shoes Factory.
According to relevant members of the city’s Consumer Council, the bending rigidity and hardness of steel hooks will lead consumers to break after use, deform the hooks, and have poor tolerance, resulting in overall deformation of shoes and instability in wearing. In serious cases, it can even make people lame and fall. If female high-heeled shoes have such problems, they will bring hidden dangers to personal safety.
The reporter also learned that there are two batches of unsatisfactory bottom peeling strength in the sample, namely: the top-level leather footwear factory in Guangzhou, September 24, 2010, the model specification grade is "PL2481002 qualified product" male Shoes (British Paul Shoes) and Huayuan Leonardo (Shenzhen) Trading Co., Ltd. produced Leonardo leather shoes with the model specification grade “T0566071L35055 Dark Brown Quality Productâ€.
According to reports, the peeling strength of leather shoes is an important indicator for assessing the adhesive fastness of the uppers and soles of leather shoes. The peel strength is not up to standard, and it is easy to open the rubber during the wearing process, so that the separation between the upper and the sole affects normal wear.
It was also learned that there were 2 batches of unsatisfactory breaking performance of shoes in this sample, unqualified bottom heel hardness, unsatisfactory outsole abrasion resistance, and unsatisfactory adhesion strength between middle and outer soles and outer midsole. There is 1 batch.
How the Consumer Council Selects the Shoes The Shenzhen Consumer Council introduced that the quality of shoes can be identified from the following aspects:
Upper: Whether it is natural leather, artificial leather or other materials, any material suitable for the upper must have the ability to withstand repeated flexing during walking; the foot feels good when worn and naturally follows; the original shoe shape can be restored and maintained after the shoe is removed Performance.
Insole: It should have breathability, absorption, and humidity. It is advisable to use a material that easily absorbs perspiration. The fitting must be tightly fitted to the inner sole. It must not be suspended or wrinkled. Otherwise, the insole will roll up or come off.
Outsole: The outsole is tightly bound with the upper, with no gaps in the adhesive and the bottom is flat. There are hook shoes, hooks do not allow the front of the tilt.
Heel (mainly referring to the middle and upper shoes): see if the heel's bending part matches the shape and size of the heel and bottom of the shoe; whether the heel is firmly attached or not, whether it is shaken forwards and backwards or backwards; Is it less than the bottom of the heel?
Main Heel and Inner Baotou: The position where the main heel and the inner head are inserted cannot be clearly distinguished. If it is expressed on the upper, it is not only unsightly but also easy to wrinkle.
Insole: not only depends on the quality of the material, but also observe that when pressing the waist forcefully (corresponding to the part of the instep when wearing shoes) does not move along the mouth, otherwise it will cause deformation when worn. Then check the shoes on the plane: the shoes should be stationary immediately on the plane, and the shoes with poor stability should not be called high-quality shoes; the position of the forefoot should be correct, not too much forward or too backward; the front of the shoes Whether it is suitable or not suitable may cause discomfort during wear; whether the heel height is the same or not, and whether the heel angle is correct (ie whether the arch can be properly fitted); there is no gap between the palm and the plane. Whether or not the heel is reclined; whether the center of gravity is offset from the palm; whether the heel is too large or too small; from the front, whether the outsole, inner and outer tilting dimensions are different, whether to maintain balance; From the back of the shoe, if the heel is inclined to the inside or outside, and whether the back seam is twisted or not; the back height and the height of the sacrum are appropriate; the back high or the harder along the mouth must be lower than the outer sacrum , or bruising the cheekbone to make it painful and not wear it.
The complaints for leather shoes increased sharply year by year. According to reports, in recent years, consumer complaints on footwear have been prominent. In 2008, the Consumer Council of Shenzhen City received 167 complaints from consumers (81 of them) and 216 in 2009 (leather shoes 119). Zong), and from January to October last year rose to 250 (115 shoes), the complaints mainly focused on broken bottom, degumming, peeling, bleaching and other issues, and there are many differences between consumers and businesses in the exchange and repair. dispute.
In order to strengthen the social supervision of leather shoe products and guide consumers to choose inexpensive and suitable products for themselves, the Shenzhen Consumer Council launched a comparative test of leather shoes (casual shoes) from December last year to March this year. The samples of this comparative test were all purchased by the city's Consumer Council staff, together with professional sampling personnel from the testing institutions, at Shimao Department Store, Rainbow Shopping Mall, Maoye Department Store, and Sun Department Store. The samples involved 55 batches of commodities from 28 manufacturing companies. The test included 12 specific items such as the strength of the base, peeling resistance of leather shoes and signs, and the inspection was conducted by the Shenzhen Institute of Metrology and Quality Inspection.
According to reports, the test report passed 35 batches and failed 20 batches. The pass rate was 63.6%, and the failure rate was 36.4%. Among the unqualified 20 batches of samples, 12 batches were unqualified, 3 batches were unqualified for intrinsic quality (except labels), and 5 batches of labels and intrinsic quality were unqualified.
Among the 17 batches of unqualified labels, the reporter found that the unqualified items involved were non-manufactured date marks in the shoes or the inner packaging, no zip code on the inner packaging (shoe box), no shoe type annotation inside the shoe, and inner packaging ( The product standard used on the shoe box is incorrectly labelled, and there is no place of production on the inner box (shoe box).
Relevant person in charge of the city’s Consumer Council stated that the unclear, incomplete, and incorrect footwear product labeling may cause consumers to purchase products that cannot be purchased when they are purchased, resulting in problems with use or quality problems that cannot be traced back.
The result of the unqualified quality of the report was learned. The reporter learned that in the comparison test of shoes (shoes), the sample with internal quality was 47 batches and the pass rate was 85.5%. Intrinsic quality substandard items are: Peeling Penetration Strength, Folding Resistance of Shoes, Heart Bending Stiffness, Heart Core Hardness, Heel Hardness at the Bottom, Outsole and Outer Bottom Adhesive Strength, Outsole Wear Resistance 7 item.
There were 3 batches of unsatisfactory hardness in the sample, namely: Leonardo shoes with model specification grade “T8520153L358022 black qualified product†produced by Zhenwei shoe factory of Zhenwei Xiefu Leather Goods Co., Ltd. of Heshan City, Guangdong Province. Heshan City Tailai shoe factory produced on January 1, 2010 model specification grade "J277307 black qualified products" men's shoes, Guangzhou City top macro footwear leather factory June 30, 2010 production model specification grade is "PS921516 -B qualified men's shoes (British Paul leather shoes). There are 1 batch of unqualified bending rigidity, which is the men's shoes with model specification grade "J277307 black qualified product" produced on January 1, 2010 by Heshan Tailai Shoes Factory.
According to relevant members of the city’s Consumer Council, the bending rigidity and hardness of steel hooks will lead consumers to break after use, deform the hooks, and have poor tolerance, resulting in overall deformation of shoes and instability in wearing. In serious cases, it can even make people lame and fall. If female high-heeled shoes have such problems, they will bring hidden dangers to personal safety.
The reporter also learned that there are two batches of unsatisfactory bottom peeling strength in the sample, namely: the top-level leather footwear factory in Guangzhou, September 24, 2010, the model specification grade is "PL2481002 qualified product" male Shoes (British Paul Shoes) and Huayuan Leonardo (Shenzhen) Trading Co., Ltd. produced Leonardo leather shoes with the model specification grade “T0566071L35055 Dark Brown Quality Productâ€.
According to reports, the peeling strength of leather shoes is an important indicator for assessing the adhesive fastness of the uppers and soles of leather shoes. The peel strength is not up to standard, and it is easy to open the rubber during the wearing process, so that the separation between the upper and the sole affects normal wear.
It was also learned that there were 2 batches of unsatisfactory breaking performance of shoes in this sample, unqualified bottom heel hardness, unsatisfactory outsole abrasion resistance, and unsatisfactory adhesion strength between middle and outer soles and outer midsole. There is 1 batch.
How the Consumer Council Selects the Shoes The Shenzhen Consumer Council introduced that the quality of shoes can be identified from the following aspects:
Upper: Whether it is natural leather, artificial leather or other materials, any material suitable for the upper must have the ability to withstand repeated flexing during walking; the foot feels good when worn and naturally follows; the original shoe shape can be restored and maintained after the shoe is removed Performance.
Insole: It should have breathability, absorption, and humidity. It is advisable to use a material that easily absorbs perspiration. The fitting must be tightly fitted to the inner sole. It must not be suspended or wrinkled. Otherwise, the insole will roll up or come off.
Outsole: The outsole is tightly bound with the upper, with no gaps in the adhesive and the bottom is flat. There are hook shoes, hooks do not allow the front of the tilt.
Heel (mainly referring to the middle and upper shoes): see if the heel's bending part matches the shape and size of the heel and bottom of the shoe; whether the heel is firmly attached or not, whether it is shaken forwards and backwards or backwards; Is it less than the bottom of the heel?
Main Heel and Inner Baotou: The position where the main heel and the inner head are inserted cannot be clearly distinguished. If it is expressed on the upper, it is not only unsightly but also easy to wrinkle.
Insole: not only depends on the quality of the material, but also observe that when pressing the waist forcefully (corresponding to the part of the instep when wearing shoes) does not move along the mouth, otherwise it will cause deformation when worn. Then check the shoes on the plane: the shoes should be stationary immediately on the plane, and the shoes with poor stability should not be called high-quality shoes; the position of the forefoot should be correct, not too much forward or too backward; the front of the shoes Whether it is suitable or not suitable may cause discomfort during wear; whether the heel height is the same or not, and whether the heel angle is correct (ie whether the arch can be properly fitted); there is no gap between the palm and the plane. Whether or not the heel is reclined; whether the center of gravity is offset from the palm; whether the heel is too large or too small; from the front, whether the outsole, inner and outer tilting dimensions are different, whether to maintain balance; From the back of the shoe, if the heel is inclined to the inside or outside, and whether the back seam is twisted or not; the back height and the height of the sacrum are appropriate; the back high or the harder along the mouth must be lower than the outer sacrum , or bruising the cheekbone to make it painful and not wear it.
Floating Locket Chains,Plated Silver Chain Necklace,Bulk Metal Necklace Chain
Lefeng Jewelry Co., Ltd. , http://www.gz-jewelry.com