How to play the larger role of the insulating glass equipment, play the larger role of the insulating glass equipment First, check the water in the water tank of the insulating glass processing equipment, then open the water pump, adjust the water spray pipe above the white sponge roller to ensure all positions of the sponge roller Can be washed out. The impurities and dirt on the sponge roll are then cleaned by hand and the sponge roll is fully expanded by foaming. Note that when opening the insulating glass production line in winter, do not open the cleaning transfer first. Because the two adjacent sponge rolls will be frozen together in winter, opening the transfer without being soaked will cause the sponge roll to be torn.
Then open the cleaning transfer, put the insulating glass equipment to be processed on the transfer wheel, pay attention to the glass must be placed smoothly, to prevent the glass from falling and causing injury during the transfer. The butyl rubber applied on the aluminum spacer should be evenly distributed and applied to the entire surface of the aluminum strip to prevent leakage and burrs. And the use of high-quality butyl rubber to ensure that the aluminum strip and the glass stand together. It is forbidden to stick dust after the aluminum spacer is coated. The two-component sealant should be applied firmly and the surface should be smooth, especially at the corners to prevent leakage and run-off.
In the process, once the problem of the insulating glass equipment is found, it is necessary to deal with it in time to ensure that the equipment meets the four requirements of “tidy, clean, lubricated and safeâ€. In the process of maintaining the equipment, the following points need special attention: 1. talcum powder is sprayed on the belt of the butyl rubber coating machine; 2. the chain gear of the production line is often oiled; 3. the glass is preferably edging, Otherwise the drive wheel will be damaged.
Everyone has learned how to play the larger role of insulating glass equipment, so take action!
The Poly Mesh Embroidery Fabric including Poly Lace Mesh Embroidery Fabric.Poly Korea Mesh Embroidery Fabric.Poly Mono Mesh Embroidery etc...
We can make Spangle Embroidery Fabric .3D Embroidery Fabric on this poly mesh fabirc.And it could be one tone or multicolor.Most of these designs are designed by ourselves and you will see that it't very popular and pretty.
Polyester Mesh Fabric,Poly Yarn Embroidery Mesh Fabric ,Poly Lace Mesh Embroidery Fabric,Poly Mesh Embroidery Fabric
SHAOXING MINGHEE EMBROIDERY CO,LTD , https://www.zjbestfabric.com