Injection molding base resin
Basic Resin for Injection Moulding
Product performance:
This product is mainly used for individual polymerization of liquid propylene, obtained in the nature of the round bar-shaped particles. The product has good strength, wear resistance, impact resistance and other properties, has good resistance to stress cracking, excellent chemical stability and insulation parts, and has good heat resistance, continuous use temperature of 120 °C, no load situation Up to 150 °C.
The main purpose:
Mainly used for the production of various injection molding products.
Typical product value
Grade
M300
M500
M700
M1600
M2600
Melt flow rate g / 10min
3.0
5.0
7.0
16.0
26.0
Tensile yield strength MPa ≥
30.0
30.5
30.5
31.4
18.5
Izod impact strength (23 °C) J / m ≥
17.0
17.0
15.0
19.6
19.6
Flexural modulus GPa)
1.3
Vicat softening point °C ≥
150
150
150
150
Rohs hardness R scale
90
90
84
84
Polymer type
Homopolymer
Homopolymer
Homopolymer
Homopolymer
Homopolymer
processing method
Injection molding
Injection molding
Injection molding
Injection molding
Injection molding
The main purpose
injection model
injection model
injection model
Daily necessities, toys, packaging
injection model
Tpu Hot Melt Adhesive ,Double Sided Seam Tape,Hot Melt Seam Seal Tape,Adhesive Seam Tape
NEW POWER INDUSTRIAL Co., Ltd , https://www.newpowerhk.com