When the cotton trench coat is being brushed, attention should be paid to the deep-colored clothes to separate and wash, light-colored clothes can be used for high-temperature washing, and dark-colored rubber band clothes should be best washed at room temperature (30-40 degrees).
Do not Push Cuonong wash coat, according to the order of the overall drop of the tape after the first partial quietly scrub. It is possible to slightly dirty or rinse the dirty dirty collar or sleeve, and then put the laundry in the washing machine.
Wash the cotton trench coat with warm water to prevent long-term soaking. First, soak the trench coat with cold water for a while, then rinse the detergent with warm water. After washing, wash it with water twice.
The best cotton t- shirt hand wash , collar and sleeves can be sprayed before washing a few collar net, not with a bristled brush to brush; not forced to tease, can not wring dry, directly with water flat, hanging sundry can be. After the windbreaker is washed, shake it flat and then expose it to the sun.
Ironing a cotton trench coat, the ironing temperature usually does not exceed 180°C. When ironing, you should press the front and back of the cuffs, the front and back sides of the sleeves, the front body, the shoulders and the joints with the sleeves, the back body, the shoulders, and the collar. The sleeves, the front body, and the rear body are ironed from the bottom up, and the cuffs, the shoulders, the collars and other parts are hot. When ironing the front, iron it from the hem . There are some two shoulders, separated by hot. The collar is finally ironed and ironed by the corner of the collar. When ironing, you should also stress the hot seams to make them expand. When ironing the windbreaker, in order to prevent the collar angle from rising outwards, the collar lining of the collar lining cloth can be well adhered, and the lining surface is laid flat on the ironing board, and the discord of the upper collar surface is matched with the lining surface, and the front surface is flat. Let go, and then the front of the upper collar and the top of the collar surface match, not flat and put up, and finally sewn on the collar, turned over and leveled.
For more content, please follow this site
Ture Potential Limited , https://www.ldgsshoes.com